1 # /etc/inittab: init(8) configuration.
 2 # $Id: inittab,v 1.91 2002/01/25 13:35:21 miquels Exp $
 3 
 4 # The default runlevel.
 5 id:2:initdefault:
 6 
 7 # Boot-time system configuration/initialization script.
 8 # This is run first except when booting in emergency (-b) mode.
 9 si::sysinit:/etc/init.d/rcS
10 
11 # What to do in single-user mode.
12 ~~:S:wait:/sbin/sulogin
13 
14 # /etc/init.d executes the S and K scripts upon change
15 # of runlevel.
16 #
17 # Runlevel 0 is halt.
18 # Runlevel 1 is single-user.
19 # Runlevels 2-5 are multi-user.
20 # Runlevel 6 is reboot.
21 
22 l0:0:wait:/etc/init.d/rc 0
23 l1:1:wait:/etc/init.d/rc 1
24 l2:2:wait:/etc/init.d/rc 2
25 l3:3:wait:/etc/init.d/rc 3
26 l4:4:wait:/etc/init.d/rc 4
27 l5:5:wait:/etc/init.d/rc 5
28 l6:6:wait:/etc/init.d/rc 6
29 # Normally not reached, but fallthrough in case of emergency.
30 z6:6:respawn:/sbin/sulogin
31 
32 # What to do when CTRL-ALT-DEL is pressed.
33 ca:12345:ctrlaltdel:/sbin/shutdown -t1 -a -r now
34 
35 # Action on special keypress (ALT-UpArrow).
36 #kb::kbrequest:/bin/echo "Keyboard Request--edit /etc/inittab to let this work."
37 
38 # What to do when the power fails/returns.
39 pf::powerwait:/etc/init.d/powerfail start
40 pn::powerfailnow:/etc/init.d/powerfail now
41 po::powerokwait:/etc/init.d/powerfail stop
42 
43 # /sbin/getty invocations for the runlevels.
44 #
45 # The "id" field MUST be the same as the last
46 # characters of the device (after "tty").
47 #
48 # Format:
49 #  <id>:<runlevels>:<action>:<process>
50 #
51 # Note that on most Debian systems tty7 is used by the X Window System,
52 # so if you want to add more getty's go ahead but skip tty7 if you run X.
53 #
54 1:2345:respawn:/sbin/mingetty --autologin calmar tty1
55 2:23:respawn:/sbin/getty 38400 tty2
56 3:23:respawn:/sbin/getty 38400 tty3
57 4:23:respawn:/sbin/getty 38400 tty4
58 5:23:respawn:/sbin/getty 38400 tty5
59 6:23:respawn:/sbin/getty 38400 tty6
60 
61 # Example how to put a getty on a serial line (for a terminal)
62 #
63 #T0:23:respawn:/sbin/getty -L ttyS0 9600 vt100
64 #T1:23:respawn:/sbin/getty -L ttyS1 9600 vt100
65 
66 # Example how to put a getty on a modem line.
67 #
68 #T3:23:respawn:/sbin/mgetty -x0 -s 57600 ttyS3
69